How to Get Started With Your LuminAID Lights

Your LuminAID lights have arrived, and now it’s time to put them to work!First, Check the Charge When you first receive your lights, check the charge level on them. To do this, you’ll need to press the battery indicator button. The 4 green LEDs will run up to 4 and then flash at the level of charge. If the green LEDs don’t light up, not to worry! This just means you’ll need to recharge your lights.

LuminAID Hurricane Dorian Response Reading How to Get Started With Your LuminAID Lights 3 minutes Next What Is #GivingTuesday?

Sep 30, 2019

Your LuminAID lights have arrived, and now it’s time to put them to work!

1. Check the Charge

When you first receive your lights, check the charge level on them. To do this, you’ll need to press the battery indicator button. The 4 green LEDs will run up to 4 and then flash at the level of charge. If the green LEDs don’t light up, not to worry! This just means you’ll need to recharge your lights.

LuminAID Phone Charging Light.

2. Charge Your Light

Charge LuminAID lights outside on a flat and open space on clear, sunny days. Ensure that the solar panel on your light is not obstructed (packaging, trees, shadows, etc.) Keep in mind that nearby buildings and trees might shade your light for part of the day, and light shining through windows is partially filtered and indirect. Although the charging indicator may turn on, the light will not be receiving enough power to charge. For charging in suboptimal conditions, such as on cloudy days or at higher latitudes, please allow for an additional 1-2 days of charging time.

If your light has a USB charging option, you can use the included cable to charge the lantern from any USB port: your computer, battery bank, or the USB wall adapter that charges your phone. Our lanterns have a 5V, micro USB input port that can be used to recharge your lantern in 1-4 hours, depending on the model you have. When you plug your light in, the red charging indicator light will be very bright. Even if your light is completely discharged, the battery indicator LEDs will light.

LuminAID lights with USB charging capabilities include the PackLite Nova USB, the PackLite Max USB, the PackLite Spectra USB, the PackLite Max 2-in-1 Phone Charger, and the PackLite Hero 2-in-1 Supercharger.

3. Inflate Your Light

All LuminAID lanterns are equipped with a specially-designed lantern that allows air to flow into and out of the light without the need to pinch or bite the valve. This allows for an easier inflation process, especially for children and the elderly. To inflate your light, unfasten the strap and open the air valve. Untwist and pull on each end of the lantern to begin inflating. Blow into the valve to ensure the lantern is fully inflated. Plug the valve with your thumb and quickly close it. You can pop the valve back in, so the lantern sits flat on a table.

4. Turn On the Light

To turn on your LuminAID light, press the power button. By continuing to press the power button, you can cycle through the lighting settings and turn the lantern off.

Woman holding LuminAID.